J08E WATER PUMP 16100-4290 HINO SK330-8 SK350-8 EXCAVATOR PARTS

J08E WATER PUMP 16100-4290 HINO SK330-8 SK350-8 EXCAVATOR PARTS

Product Description

Product advantages

1. The water pump impeller adopts the raw material Seiko pure aluminum leaf
2. Using imported high-quality bearings
3. Use high quality seals to ensure no water leakage
4. Original 1:1 mold opening design and manufacture, no deviation in size, accurate hole position
5. The water pump shaft adopts VG drill steel, pure fluorine rubber oil seal
6. Using high-strength materials, corrosion resistance, wear resistance, and long service life

Our advantages

1. Best price with good quality product We have factory product support and financial support , so the product cost is very low , and the price given is also pretty acceptable . More importatly , our product quality is good .

2. Substantial product information , We have detailed parameters , so send us the right model and correct number , we can supply the exact product .

3. Salesperson with professional knowledge and abundant experience has been developing , so we have wealthy experience .

4. Strict and integral company system We will try our best to obey customer’s delivery time . Before delivering your products , we must check the part number or pictures of the products carefully to let our customers receive high-quality and right-quantity goods .

5. Good service attitude If you have any questions about the product , after knowing the situation , we will help the customer to solve the problem at the first time . As long as customers’ requirements are reasonable , we will endeavour to satisfy them .

More related products you are looking for

1. Boom Cylinder Seal Kit
2. Excavator Seal Kit
3. Final Drive Seal Kit
4. Floating Oil Seal
5. Center Joint Seal Kit
6. Excavator Solenoid Valve
7. Excavator Hydraulic Parts
8. Track Adjuster Seal Kit
9. Arm Cylinder Seal Kit
10. Hydraulic Breaker Seal Kit
11. TC Oil Seal
12. Excavator Spare Parts
13. Transducer Sensor
14. Excavator Monitor

Water pump failure performance

1. Unstable idle speed:
The failure of the water pump can cause the rotational resistance of the water pump to increase.
2. There will be noise in the engine part:
This sound is a rolling friive, similar to the sound of "boom boom boom".
This sound can be accelerated as the engine rotates and changes in volume
change. This noise generally increases with the severity of the fault
increasingly obvious.
3. Cooling system failure
1) Hot air is not hot
The most overlooked phenomenon caused by lack of flow. Engine water in winter
After warming up,
The hot wind cannot blow out, and inexperienced people even think that
The car is dead, it's time for a replacement. In fact, just replace a small water pump.
All can solve the problem.
2) Engine water temperature is unstable:
The performance is that the engine water temperature indior needle fluctuates within a certain range. The reason is
The water temperature in the small cycle is inconsistent due to the lack of circulation. On the one hand, it leads to
The opening temperature of the thermostat increases, on the other hand, after the high temperature water flows out, the low temperature
The water quickly flows to the thermostat, causing the thermostat to close quickly. Under normal conditions
After warming up, the water temperature of the engine will remain at a relatively constant
level, approximately at 93°C.
3) The cooling water is reduced, the large circulation is not smooth, and the engine is high temperature:
At this point, the pump has been relatively serious damage. If you continue
Driving will directly lead to increased engine damage.

FAQ

Q1. Which shipment can you supply?

A1: By sea, by air or by express(DHL, Fedex, TNT, EMS, UPS, etc).

Q2. What is your terms of packing?

A2: Generally, we pack our goods in neutral cartons or wooden boxes. If you have legally registered patent, we can pack the goods in your branded boxes after getting

your authorization letters.

Q3. What payments are available?

A3: T/T , Western Union, Trade assurance, L/C.

Q4. What is your terms of delivery?

A4: EXW, FOB, CFR, CIF.

Q5. How about your delivery time?

A5: Generally, it will take 1 to 3 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q6. What is your sample policy?

A6: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample fee and the courier cost.

Q7. Do you test all your goods before delivery?

A7: Yes, we have 100% test before delivery.

Q8: How do you make our business long-term and good relationship?

A8:1. We keep good quality and competitive price to ensure our customers benefit .

2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Q9: How can i trace my order?

A9: We'll send you the Bill of Lading or express tracking number once it comes out.

J08E WATER PUMP 16100-4290 HINO SK330-8 SK350-8 EXCAVATOR PARTS Images